UPDATE: Flash flood warning affecting Erath and Hood counties Thursday afternoon, says the NWS

An updated flash flood warning was issued by the National Weather Service on Thursday at 12:05 p.m.

"At 12:05 p.m., Doppler radar and automated rain gauges indicated thunderstorms producing heavy rain across the warned area. Between 1.5 and 2.5 inches of rain have fallen. Additional rainfall amounts of 0.5 to 1 inch are possible. Flash flooding is already occurring," comments the NWS. "Flooding of small creeks and streams, urban areas, highways, streets, and underpasses as well as other poor drainage and low-lying areas."

Locations impacted by the warning include Stephenville, Granbury, Pecan Plantation, Lipan, Bluff Dale, Morgan Mill, Oak Trail Shores, Squaw Creek Reservoir, Huckabay, DeCordova, Cresson, Tolar, Stockton Bend, Waples, Mambrino, Paluxy, Patillo, Lake Granbury, Selden and Acton.

The NWS states, "Turn around, don't drown when encountering flooded roads. Most flood deaths occur in vehicles. Be aware of your surroundings and do not drive on flooded roads."

This warning is in effect until 2:15 p.m.

Recommendations from the NWS for staying safe during a flood

For either residents or campers of flood-prone, low-lying areas, take immediate action and seek higher ground. Follow evacuation instructions without delay. If time permits, lock your home upon departure and disconnect utilities and appliances. Avoid entering basements or rooms where electrical outlets or cords are submerged in water. If you see sparks or hear buzzing, crackling, snapping, or popping sounds, evacuate the area immediately. Refrain from entering water that may have electricity in it and avoid walking through floodwaters. Even 6 inches of moving water can pose a serious risk of knocking you off your feet. If you find yourself trapped by moving water, move to the highest possible point and contact emergency services, and dial 911.

When heavy rain occurs, there is a potential for flooding, particularly in areas that are low-lying or prone to floods. It is crucial to never drive through water on the road, even if it appears shallow. According to the NWS, as little as 12 inches of fast-flowing water can carry away most vehicles.

What to do in the rain on the road?

• Turn on headlights — Even in daylight, using headlights can help improve visibility and let other drivers know where you are.

• While on the road — Opt for the middle lanes and remain on higher ground. Rainwater tends to gather along the road edges.

• Avoid puddles — Driving into puddles or low rainwater areas can lead to vehicles hydroplaning or losing control.

• Don't tail large vehicles closely — Trucks or buses can kick up a water spray that obstructs visibility.

• Steer clear of flooded areas — When coming to a flooded road, turn around and head back. Flash flooding currents are strong and can sweep drivers off roadways. Driving through deep water can also affect a vehicle’s mechanical and electrical systems.

What is hydroplaning?

Hydroplaning is when a vehicle starts uncontrollably sliding on wet roads.

This happens when water in front of the tire builds up faster than the vehicle’s weight can push water out of the way. The water pressure then causes the vehicle to rise and slide on a thin layer of water between the tires and the road, making the driver lose control. The top three contributors to hydroplaning are:

1. Vehicle speed — When a vehicle’s speed increases, the tire-traction grip and ability to control the vehicle decreases. Drive at a reduced speed during wet weather.

2. Water depth — The deeper the water, the sooner a vehicle loses traction on the road. It doesn’t matter how deep the water is, even a thin layer can lead to hydroplaning.

3. Tire tread depth — Checking your tire tread before hitting the road is important, as low or no tread can lead to sliding.

In the event of your vehicle hydroplaning, here’s what to know:

• Ease off the accelerator — Step off the gas to slow down the vehicle until the tires find traction.

• Turn into the skid — Turning into the skid can help the vehicle’s tires realign to regain control.

• Make sure the tires reconnect with the road — During the skid, wait until the tires reconnect with the road and then gently straighten the wheels to regain control.

• Brake gently as needed — Brake normally if the vehicle has anti-lock brakes and pump brakes gently if in an older vehicle.

Source: The National Weather Service