undefined
Posts
undefined
Followers
User since undefined NaN
spri
user · 177 followers
2025-09-16
* Load the software code onto the device: the "environment adapting" code, the "group control" code, and the "software update" code.
* Connect the device to the phone app.
* Test Remote Shutdown: When the phone app tells it to shut down, the device must react within 80 milliseconds (that's super fast!).
* Automatic Tests:
* Control 20 People: In different situations, it must follow instructions correctly at least 99% of the time.
* Electromagnetic Compatibility (EMC): Must pass the strict US FCC Class B test (meaning it doesn't mess up other electronics).
* Drop Test: Dropped from 1.5 meters (about shoulder height) onto a hard floor, it must still work perfectly.
* Battery Life Test: Run for 72 hours without power. Its battery life should drop by no more than 8%.
5. Finishing & Shipping (1 Day)
* Robots automatically clean the device.
* Pack it in special anti-static wrapping (includes USB cable, QR code to download the app, instruction manual).
* The manual now includes new sections: "How to Use the Person-Check Feature" and "Important: Battery Life in Cold Weather".
* Upload the complete record of how this device was made (its "birth certificate") to the supply chain computer system.
* (C) Making the Long-Life Version (20-22 Days, Costs 12,850 )
* Total Time: 20 to 22 days. Total Cost: 12,850 RMB.
* Note: This version is just like the basic one, but it has much longer battery life (adds a super-capacitor backup and a hand-crank generator).
1. Buying Parts (4 Days)
Buy everything the basic version needs, plus* these extra parts:
* 100 Farad Thin-Film Super-Capacitor (a super-fast backup battery; supplier gives a free sample).
* Gallium Nitride (GaN) FET Switch (a super-efficient power switch; costs 30 ).
Hand-Crank Power Generator (lets you charge it by hand; costs 20 RMB).
* The robots connect to 2 extra suppliers who specialize in these power parts (using APIs).
* The money for these extra parts also comes from the "reserved costs".
2. Making the Modules (6 Days)
Reuse Basic Modules (5 Days): The Brainwave Module, the main Power Module (battery part), and the Person-Check Module are made exactly* the same way as the basic version. This takes 5 days.
* Add Power Backup Module (1 Day): Robots assemble the super-capacitor and the GaN switch together. Test Requirement: If the main power cuts out, the switch to the super-capacitor backup must happen within 10 milliseconds (instantly!). If it's slower, the robots adjust the switch's settings until it's fast enough.
3. Putting It All Together & Sealing It (5 Days)
* 3D print the case, but this