OnePlus 10 Pro Specifications

UPDATE: The global model is now out as well. The specs are pretty much the same, except it comes with global Android 12 with OxygenOS 12, different RAM and storage combo, and the model in the US includes 65W wired charging instead of 80W charging.

ORIGINAL ARTICLE: The OnePlus 10 Pro got announced in China today. We already talked about the phone in our original announcement, and are here to talk about its specs. So if you’d like to take a closer look at the OnePlus 10 Pro specifications, read on.

This smartphone is fueled by one of the most powerful mobile processors on the market at the moment, the Snapdragon 8 Gen 1. This is Qualcomm’s brand new flagship processor.

The OnePlus 10 Pro comes in 8GB & 12GB RAM variants

That chip is paired with either 8GB or 12GB of LPDDR5 RAM, and either 128GB or 256GB of UFS 3.1 flash storage (8GB RAM + 128GB storage in the US). Just to be clear, the 8GB RAM model comes in both storage options, while the 12GB RAM model includes 256GB of storage. You cannot expand that storage, by the way.

OnePlus included a 6.7-inch QHD+ (3216 x 1440, 525 PPI) display here. This is a curved Fluid AMOLED display with second-gen LTPO calibration. Its refresh rate goes from 1Hz all the way up to 120Hz. There is a hole punch in the top-left corner of this panel. This panel is protected by the Gorilla Glass Victus.

It has a large battery, and supports 80W wired & 50W wireless charging

A 5,000mAh battery powers the phone, and it supports 80W (65W in the US) SuperVOOC fast wired charging. In addition to that, the device also supports 50W AirVOOC fast wireless charging, and reverse wireless charging.

You can fully recharge the OnePlus 10 Pro in only 32 minutes with this wired charging. If you opt to charge it wirelessly at 50W, with OnePlus’ charger, you can get it from 1 to 100-percent in only 47 minutes.

The phone is IP68 certified for water and dust resistance, by the way. It does support Bluetooth 5.2, and has an NFC chip. There are stereo speakers included here, and an alert slider as well. At the bottom, you’ll notice a Type-C USB 3.1 port. This phone also has an in-display fingerprint scanner of an optical variety, just like its predecessor.

There are three cameras on the back with Hasselblad branding

There are three cameras on the back, and one on the front. A 48-megapixel main camera (Sony’s IMX789 sensor, 1.12um pixel size, OIS, f/1.8 aperture, 7P lens) is backed by a 50-megapixel ultrawide unit (Samsung S5KJN1SQ03 sensor, 150-degree FoV, 0.64um pixel size, 6P lens, f/2.2 aperture). The third camera on the back is an 8-megapixel unit (OmniVision OV08A19 sensor, f/2.4 aperture, OIS, 5P lens, 3.3x zoom). A single 32-megapixel camera (Sony’s IMX615 sensor, Sony’s IMX615 sensor, f/2.4 aperture) sits on the phone’s front side.

The phone is not too wide, but it’s quite tall

The device measures 163 x 73.9 x 8.55mm, while it weighs 197 grams. That goes for both variants, as both are made out of metal and glass, even though it seemed like OnePlus will use a different material on the back of the Volcanic Black variant of the phone.

Speaking of which, the company announced two color options, the Volcanic Black and Emerald Forest options. Android 12 comes pre-installed on the OnePlus 10 Pro, with ColorOS 12.1 in China. OxygenOS 12.1 will come pre-installed on the global variant.