Correction to: Microsystems & Nanoengineering
https://doi.org/10.1038/s41378-021-00314-6 published online 19 October 2021
Following publication of this article1, it is reported the Acknowledgement section need to be updated as below:
This work is partly supported by the EPSRC through an Engineering Fellowship (EP/R029644/1) and Programme Grant-Heteroprint (EP/R03480X/1) and North West Centre for Advanced Manufacturing project funded by the European Union’s INTERREG programme (H2020-Intereg-IVA5055), managed by the Special EU Programmes Body. The views and opinions in this document do not necessarily reflect those of the European Commission or the SEUPB.
The original article has been updated.
Reference
Christou, A., Liu, F. & Dahiya, R. Development of a highly controlled system for large-area, directional printing of quasi-1D nanomaterials. Microsyst. Nanoeng. 7, 82, https://doi.org/10.1038/s41378-021-00314-6 (2021).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Christou, A., Liu, F. & Dahiya, R. Correction: Development of a highly controlled system for large-area, directional printing of quasi-1D nanomaterials. Microsyst Nanoeng 7, 98 (2021). https://doi.org/10.1038/s41378-021-00326-2
Published:
DOI: https://doi.org/10.1038/s41378-021-00326-2
